petsafe.com 3
NOTICE
• Keep these instructions with important papers; be sure to transfer
these instructions to the new owner of the property.
• If painting the pet door, it is recommended to paint it prior to
installation. For best results, use a primer for plastics before
applying paint.
• If homeowner’s door or other application is not level, the pet door
must be marked level to swing properly.
• Cut out correct size template. For the Large no cutting is required.
If installing in a wall, reduce cut-out width by 1” for the Small and
Medium. For the Large, reduce cut-out width by 1” and cut-out
height by 1”.
• When applying cutting template there should be a minimum of 3”
between the bottom and sides of the door and the outer edge of
the template to maintain the structural integrity of the door.
• Make sure there is nothing underneath the door where you will be
drilling the holes or cutting out opening.
• Use a manual screwdriver to tighten screws. Do not overtighten.
Overtightening can strip the screws or warp the pet door frame.