background image

1

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Read all the instructions before using the appliance.

To reduce the risk of injury, close supervision is necessary when an 
appliance is used near children.

To protect against electric shock, do not place cord or plug in water 
or other liquids. 

Only use attachments recommended or sold by the manufacturer.

Do not use outdoors. FOR INDOOR HOUSEHOLD USE ONLY.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. 

Do not operate any appliance with a damaged cord or plug or after 
the appliance malfunctions or has been dropped or damaged in any 
manner. Call customer service immediately for further instructions. 

For a portable appliance - To reduce the risk of electrical shock, do 
not place or store an appliance where it can fall or be pulled into a 
tub or sink. 

Always unplug any appliance when not in use, before putting on 
or taking off parts and before cleaning. Never pull on the cord to 
remove the adaptor from the wall outlet. 

Do not use an appliance for anything other than its intended use. 

1)

2)

3)

4)

5)

6)

7)

8)

9)

10)

WARNING: When using electrical appliances, basic safety precautions should 

always be followed to reduce the risk of fire, electric shock and/or injury to 

persons, including the following: 

400-1456/1

Summary of Contents for Drinkwell Zen Fountain












Reviews: