Petsafe Drinkwell DOGCKA-RE, Operating Manual

Page: 7 / 28

www.petsafe.net 7
KO
EN
Operating Instructions
Important:
DO NOT RUN DRY - FOR INDOOR USE ONLY. Pet Fountain will come
fully assembled and ready for use.
1. As with any electrical device, check the electrical cord for any tears or damage
before use.
2. Inspect the bottom of the Pet Fountain to be sure the Pump is securely attached
(
fig. 1
).
3. Remove the Housing Lid and insert the Charcoal Filter. The Charcoal Filter will fit
diagonally into the Housing. The Charcoal Filter fits narrow side down, with the
black side facing the front of the Pet Fountain (toward the spout). The Charcoal
Filter will slide easily into place, but make sure it is pushed all the way down
(
fig. 2
).
Important:
Rinse the Charcoal Filter thoroughly under cool water before placing in
the Pet Fountain. This will remove any loose charcoal dust, which is harmless. A small
amount of charcoal dust may shed for the life of the Charcoal Filter. This is normal and
not harmful to your pet.
4. Place Pet Fountain in desired location before adding the reservoir. If placing on
carpet, tile or wood flooring use a protective mat or other durable, water resistant
surface to protect your floors from splashing or dripping caused by the pet.
5. Before you plug the Pet Fountain in, make sure the Power Cord and your hands
are dry. Plug the Pet Fountain into an electrical outlet.
6. Fill both the Bowl and the Pet Fountain Housing with water only until the water
reaches the fill level in the Bowl.
7. Fill Reservoir with water.
8. Check the Reservoir Cap to make sure the black O-ring is in place, then screw the
Reservoir Cap onto the Reservoir.
fig. 1 fig. 2
pUmp