Petsafe Drinkwell DOGCKA-RE, Operating Manual, Page: 11 / 28

www.petsafe.net 11
KO
EN
5. Hold these parts in place with one hand while attaching the Housing with the
other hand (
fig. 12
). Attach the Housing by sliding the cutout in the wall of the
Housing down in between the Flow Control Knob and Stator. The Housing will
click into place, when the side tabs are inserted in the Bowl (
fig. 13
).
6. Place the Pet Fountain in desired location.
Important:
Make sure to use a
protective surface, such as a towel or place mat, to protect your floors from
splashing or dripping from your pet.
7. Replace the Charcoal Filter and fill the Housing, Bowl, and Reservoir with water.
Replace the Housing Lid.
8. Before you plug the Pet Fountain in, make sure your hands and the cord are dry.
Check the Power Cord for any damage before plugging in the Pet Fountain. Plug
the Pet Fountain into an electrical outlet.
the pet fountain and your Environment
If you live in a humid environment and have problems with mold or algae, soak all
Pet Fountain parts in a diluted vinegar solution (20% White Vinegar and 80% Water)
for 10 minutes after regular cleaning. Also, pour the diluted vinegar solution into the
Pump’s motor cavity.
If you have hard water, small white mineral deposits may form on or inside the Pump.
This can eventually prevent the Impeller from turning properly. To avoid replacement or
damage to the Pump, please take the following precautions:
• Clean the Pump more frequently.
• Clean the Pump with a diluted vinegar solution weekly.
• Use bottled water instead of tap water.
fig. 12
fig. 13