www.petsafe.net
5
Add an Upright Post for the Gate
1. Gather 1 upright, 2 clamps , and 1 -
5
/
16
" x 2" carriage bolt with nut.
2. Install the gate post 50 cm to either side of the corner upright.
Important: Do NOT have the gate span a joint in the frame. The frame can come apart at the
swedged joint.
50 cm
Note: Gate Opening is 50 cm between posts. All swedged joints will be loose until fence fabric is installed.
__________________________________________________________________________________________________
Add Top Rails
1. Gather 4 corner rails, 2 frame rails, 14 clamps and 7 -
5
/
16
" x 2" carriage bolts with nuts.
2. Point all top rail swedges clockwise the same as the bottom frame.
3. Connect rails to all posts (
4A
). Tighten all clamps as you go.
4A
Important: Check that all posts are straight up and down. Confi rm that all nuts are tight.
Step
3
Step
4
Summary of Contents for Do-It-Yourself Dog Run
Page 50: ...50 www petsafe net ...
Page 51: ...www petsafe net 51 ...
