STEP 4
2-Dog System
Note: If you wish to add another Receiver Collar to the training system, an Add-A-Dog
®
Receiver Collar is available where you bought your training system, through our website or
Customer Care Centre.
PAC19-14591—Little Dog Add-A-Dog
®
or PAC19-14594—Big Dog Add-A-Dog
®
To Add Dog 2
Handheld Remote
1. Press the Stimulation Down Button (lower right - grey)
consecutively until “2d” appears on the Digital Display.
2. After the “2d” appears press the +2 Boost Button.
3. Set Dog 1 Stimulation Level to the desired level using the
Stimulation Up and Down Buttons.
4. Press the +2 Boost Button to lock the Stimulation Level
for Dog 1.
5. Set Dog 2 Stimulation Level to the desired level using the
Stimulation Up and Down Buttons.
6. Press the +2 Boost Button to lock the Stimulation Level
for Dog 2.
Dog 2 Receiver Collar
1. With the Receiver Collar off your pet, turn the Receiver Collar off.
2. Press and hold the On/Off Button for 5 seconds.
3. The Receiver Collar will beep and the LED will flash.
4. On the Handheld Remote, press the Stimulation Up Button (upper right - grey) or Stimulation
Down Button (lower right - grey).
5. The Receiver Collar will respond and pair.
6. If the Receiver Collar does not respond, please contact the Customer Care Centre.
Digital Display
Tone
Stimulation
Up
Charging Jack
(with cover)
Transmitter Antenna
Stimulation
Stimulation
Down
+2 Boost
www.petsafe.net 153
152 www.petsafe.net
FI
DA
SV
RU
NO
EN
