background image

8

 

1-800-732-2677

 

Modes of Operation

To turn the Bark Control Collar ON, press and release the 

•฀

Mode Push-button. The unit will flash the Indicator Light 
Green 1 time for Low Mode, 2 times for Medium Mode and 
3 times for High Mode.
To turn the Bark Control Collar OFF, press and hold the 

•฀

Mode Push-button for 4-5 seconds. When the unit turns off, it 
will flash the Indicator Light Red 5 times to indicate the unit 
is turning off. Turn the Bark Control Collar OFF when not in 
use to conserve battery power. 
Begin use of the Bark Control Collar on the Low Mode and 

•฀

only increase to the Medium Mode if your dog does not 
respond. When the collar is in the Low Mode, the Indicator 
Light will flash green once every 5 seconds.
If your dog does not respond to the Low Mode, increase to 

•฀

the Medium Mode by pressing the Mode Push-button and 
holding it for 2-3 seconds and then releasing it. The collar will 
advance from Low to Medium Mode and the Indicator Light 
will now flash 2 times every 5 seconds.

Mode

Push-button

Indicator

Light

Sound

Activated

Sensor

If your dog does not respond to the Medium Mode, increase to the High Mode by pressing the 

•฀

Mode Push-button and holding it for 2-3 seconds and then releasing it. The collar will advance 
from Medium to High Mode and the Indicator Light will now flash 3 times every 5 seconds.
You can verify your Bark Control Collar is working properly by setting it to the Test Mode. To enter 

•฀

the Test Mode, advance the collar to the High Mode by pressing and releasing the Mode Push-
button as described above, then press and hold the Mode Push-button for 2-3 seconds and then 
release it. This will advance the collar from High to Test Mode and indicate the new Mode by a 
solid orange indicator light. DO NOT USE this Mode for normal operation. See “To Test the Bark 
Control Collar” for more information on using this mode. To exit the Test Mode press the Mode 
Push-button for 2-3 seconds and then release it. This will advance the collar from Test to Low 
Mode and indicate the Low Mode with 1 flash of the Indicator Light every 5 seconds. 

Note: If the Bark Control Collar is turned OFF while in Test Mode, it will begin in Low Mode when 
turned back on.

Indicator Light Functions

Indicator  
Light 
Color

Number 
of 
Flashes

How Often?

Indication

None

None

Unit is Off.

Green

1

Once Every 5 Seconds

Low Mode is active and battery is good.

Green

2

Once Every 5 Seconds

Medium Mode is active and battery is good.

Green

3

Once Every 5 Seconds

High Mode is active and battery is good.

Red

3

Once Every 5 Seconds

Battery is low and needs to be replaced.

Red

5

Once Only

Unit turning Off.

Orange

Solid

Solid

Test Mode is active.

Summary of Contents for Deluxe PDBC-300

















Reviews: