www.petsafe.net
13
Goal:
To teach your cat to associate the Static Correction with the position of the Static Correction
Zone.
Steps:
1. Set the Receiver Collar to Level 2 – the lowest Static Correction level.
2. Fit the Receiver Collar as detailed on pages 6 and 7 of this guide.
3. Lead your cat to the Boundary Flags, but let him move through the Warning Zone to
receive the small Static Correction.
Note: You may need to remove every other fl ag at this stage to encourage your cat to approach the
Static Correction Zone.
4. When your cat is corrected, urgently say “run away, run away” while pulling him into the
Pet Area where the beep will stop. Praise and give affection to your cat.
5. If your cat ignores the Static Correction, fi rst check the Receiver Collar fi t to ensure good
contact with the skin and try again. If he still ignores the correction, try gradually increasing
the Correction Level as detailed on pages 4 and 5 of this manual until he reacts.
6. This should complete the association with the need to move away from the Boundary. If
your cat has responded well to the previous steps, it should not be necessary to purposefully
make your cat experience a Static Correction more than once or twice.
Summary of Contents for Deluxe In-Ground Cat Fence
Page 23: ...www petsafe net 23 ...