4
1-888-632-4453
Determine Position of Gate Panel
Position the gate panel so that the
PetSafe
®
logo plate is on the outside of the
kennel. Gate panel can be positioned on
right or left side of kennel. For ease of use,
it is recommended that the gate panel be
positioned on the right side (
1A
).
1A
__________________________________________________________________________________________________
Assemble Kennel
Important: The SunBlock Top
™
will fi t best if the kennel is
assembled in a perfect square. Please assemble the panels
as noted in illustration (2A).
1. Using a wrench, remove the two kennel clamps that are
attached to the wire mesh of each of the kennel panels (
2B
).
2. Support gate panel with gate door by opening gate door at a
45 degree angle. This will allow gate panel to stand upright
unassisted (
2C
).
3. Using a wrench and two of the supplied kennel clamps,
attach a plain panel to the gate panel. Position one clamp
approximately 4 inches from the top of the kennel and one
clamp approximately 6 inches from the bottom of the kennel.
For the safety of your dog, attach clamp so that nut is on
the outside of the kennel. See (
2D
) for clamp and panel
orientation.
4. Continue connecting remaining plain panels using wrench
and two clamps per connection.
2A
2C
2D
2B
Step
1
Step
2
Summary of Contents for Cottageview
Page 1: ......
