manualshive.com logo in svg

Petsafe Comfort-Fit System, Operating And Training Manual

Share
Download
Petsafe Comfort-Fit System Operating And Training Manual Download Page 20

20 

1-800-732-2677

Product Warranty

Please register your product online at www.petsafe.net. All parts are covered under warranty for the life of this product 
Labor is covered for the first year of ownership. Thereafter, there is a minimum service charge for the repair or replacement 
of the product. Misuse, loss, damage by pet or improper use or handling is not covered. PetSafe

®

 will not pay for loss 

of time, inconvenience, loss of use of your product or any incidental or consequential damage. Warranty void if product 
resold. 

Please contact the Customer Care Center at 1-800-732-2677 if you need service or for help in troubleshooting and, if 
needed, to arrange a repair for your product (a service charge may apply.) Also, please visit our website www.petsafe.net for 
Frequently Asked Questions and Troubleshooting Tips.

_______________________________________________________________________________________________________________________________

Perchlorate Battery

Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

Summary of Contents for Comfort-Fit System

























Reviews:

No comments

Brands by name

Popular brands

Load more brands