![background image](http://html1.mh-extra.com/html/petsafe/aqua-fountain-mww00-15797/aqua-fountain-mww00-15797_manual_1532575012.webp)
12
www.aquapetfountain.com
EN
ES
FR
IT
NL
DE
Pet Fountain Reassembly
1. Check the flow control on the Pump. Make sure it is in the desired flow rate
position (
Fig. 13 & 14
).
Fig. 14
Maximum
Fig. 13
Minimum
2. Place the Pump inside the Bowl’s square indention with the Pump tube positioned
in the back left corner (
Fig. 15
).
3. Make sure the In-Line Plug is disconnected from the Adaptor. With the Pump in
place, pass the cord through the hole in the rim of the Bowl. Feed the cord all the
way through and push the Rubber Grommet into place to seal the hole. Be sure to
leave enough slack in the cord so the Pump rests flat (
Fig. 16
).
Fig. 15
Fig. 16
Rubber Grommet
4. Replace the filter Housing by lowering it straight down over the Pump. Be sure the
Housing clips align with the guide holes on the rim of Bowl. Push down to lock
into place (
Fig. 17 & 18
).
Fig. 17
Fig. 18
Summary of Contents for aqua fountain Mww00-15797
Page 98: ...98 www aquapetfountain com ...
Page 99: ...www aquapetfountain com 99 ...