www.petsafe.net
9
What to Expect During Use of the Anti-Bark Collar
Important: Do not leave your dog alone the fi rst few times he receives a
Static Correction.
Step One:
(Day 1-5) Start by putting the Anti-Bark Collar on Mode 1. Now
put your dog in the situation where it has barked in the past. This situation
should not be one where strangers arrive or enter your property. Upon
barking, the dog will receive Audible Tone and Static Corrections as he barks.
This should curb the behaviour quickly. If this training mode does not stop
your dog’s barking after one hour and excessive barking is still occurring,
switch the collar to Mode 2.
Step Two:
(Day 6 and beyond) Your dog is now ready for the tone only mode
of the collar, which is Mode 3. In this mode, your pet will only receive audible
tone with no static correction. Your pet may need the occasional refresher
course if barking reappears. In this case, go back to step one and reintroduce
the static correction.
____________________________________________________________________
Regular Maintenance
• Check Contact Points for tightness weekly
Note: Do not adjust the factory preset Sensor Probe.
• Clean Contact Points with alcohol weekly
Note: Remove the battery and discharge the Anti-Bark
Collar before touching the Contact Points.
• Check your dog’s neck for irritation and wash neck
weekly.
Summary of Contents for Anti-Bark Collar
Page 41: ...www petsafe net 41 ...
Page 42: ...42 www petsafe net ...
Page 43: ...www petsafe net 43 ...
