pets PET617-1 User Manual Download Page 7

Important  The proper fit and placement of the Collar Receiver is essential for 

your dog's neck  making direct contact with the dog's skin  If direct contact is not 

possible  shaving some fur away  ensuring good contact is recommended 

Fasten the collar strap  The fit should be snug  but not taut  A finger should be 

able to be placed beneath the collar strap when around the dog's neck

Allow the dog to wear the Collar Receiver for several minutes and check the 

strap again  The dog will soon become more familiar with the Collar Receiver  so it

 is crucial to ensure the fit comfortable and flattering 

To fit the Collar Receiver  attach the Collar Strap to the Receiver 

With the dog standing in front of you  place the Collar Receiver around the 

dog's neck  so the receiver box and Contact Points are on the underside of 

effective training. The contact points must have direct contact with the dog's  skin

CAUTION: RISK OF SKIN DAMAGE

  For comfort, safety and effectiveness of this product please check the fit of the 
dog's collar frequently. If observing any skin irritation, immediately discontinue 
use of the collar for a few days. If the skin condition persists beyond 48 hours, 
consult a veterinarian. 

  Do not attach a leash to the collar, which can result in squeezing the Contact 
Points too tightly against your dog's neck. 

  The design of the Collar Receiver discourages constantly wearing the device. 
Petrainer  recommends  the  collar  not  wearing  for  more  than  12  hours  out  of 
every 24-hour period. 

After deciding the type of stimulation  press either Vibration Button 1 or 

  

Vibration

Button 2  depending on which receiver is undergoing the test   the Collar Receiver 

 Collar Receiver will vibrate

 4

  Petrainer suggests giving the dog, the vibration stimulation before following it 
with a static shock. After training for a while using this method, the dog will be 
aware that after vibration comes a static shock. Vibration will act as a warning, 
and static shock only acts as a menace that might be necessary sometimes.

Ensure Contact Points are not too tighton a weekly basis

Rinse the Contact Points with alcohol on a weekly basis

.

Check the dog's neck for irritation and wash the dog's neck on a weekly basis

.

    Most  dogs  feel  uncomfortable  when  wearing  the  collar  for  the  very  first  time. 
Do not use any functions until the dog is accustomed to the collar.

 5

Step5 Re-thread the collar(as diagram)

Summary of Contents for PET617-1










Reviews: