Ipets products are reliable, effective, and comfortable for large or small dogs.
The system assists in controlling your dog without a leash in a range up to 650
yards away! Instantly send a signal from the Remote Transmitter, which activates
your dog's Collar Receiver. The dog will receive an annoying but safe, harmless
stimulation. With correct, consistent use of this product, the dog will associate
his misbehavior with your corrections, and soon enough, you will have a well-trained
dog. This particular model features adjustable levels of stimulation, enabling the
user to tweak accordingly to the dog's temperament, removing the risk of over
stimulation.
Power Saving
R
T
and Receiver Collar
R
T
and Receiver Collar
A solid red light will appear on the Indicator Light, indicating
Insert the charging connector into the Charging Jack
Uncover the Charging Jack by lifting the Rubber Cover
Plug the charger into a standard wall outlet
Once charging is complete, the solid red light will turn to a solid green light
charging is occurring
The collar-receiver,if left unused for 5 minutes,will enter into “DEEP SLEEP”
status,yet it can be activated by any movement.
The remote transmitter,if left unused for 2 minutes,will enter into”STANDBY”
status;if unused for 5 minutes,it will enter into”DEEP SLEEP”STATUS.To activate
the transmitter in separate cases,you can simply press any button (except the
LED LIGHT button) and the”MODE”button(for 1 sec)separately.
Note: Before first use, charge the Remote Transmitter and receiver
Collar until completion.
Powering on and off the Remote Transmitter
Press and hold the Power Button for several seconds, the LCD display will
and the Transmitter Indicator Light will turn to solid green
appear
To power off the Remote Transmitter, press and hold the Right Side Button for a
few seconds,and Indicator Light will turn to red
Powering on and off the Collar Receiver
To power on the Remote Collar Receiver, align the Remote Transmitter Pairing
Symbol with the corresponding Collar Receiver Pairing Symbol, once the
Receiver Indicator Light is green separate the two Pairing Symbol. The Collar
Receiver is now on
To power off the Remote Collar Receiver, realign the Remote Transmitter
Pairing Symbol Transmitter with the corresponding Collar Receiver Pairing
Symbol, once the Receiver Indicator Light goes red separate the two Pairing
Receptacles. The Collar Receiver is now off
NB:The indicator light of collar-receiver will flash red if it needs recharging.
Replace the Rubber Cover to protect the Charging Jack
Summary of Contents for PET617-1
Page 1: ......
