Product Operation
1. SETTING THE CURRENT TIME
Plug in or install four „C” sized batteries, then turn on the switch at the bottom.
1. Press the SET button. The hour digits will flash.
2.
or
buttons to find the current hour and press SET again to save.
3. Once hour is saved, the minute digits will flash.
4.
buttons to find the current minute and press SET again to save and
enter Meal Time Setting Mode.
2. SETTING THE FIRST MEAL TIME
1. Once the time is set, the unit will enter Meal Tome Setting Mode. The LCD will display the
icon and the hour digits will flash.
2. Press the
or
buttons to find the hour and press SET again to save.
3. Once hour is saved, the minute digits will flash.
4.
buttons to find the minute and press SET again to save. Then repeat
the steps above to set the feeding time or next meal. The unit can be set up to four meals
per day. If only 3 meals per day is required, then please press and hold SET key for three
seconds to quit and save the previous setting.
3. RECORDING MEAL CALL FOR YOUR PET
Follow below steps to record your voice to call your pet when feeding.
1. Press and hold the REC button. The MIC light will display on the control panel.
2. Speak into the Recording Port (small hole by the MIC light) and record your message (up to
10 seconds).
3. Release the REC button when recording finished. The MIC light will go off.
4. Press the PLAY button to listen to the message. Repeat the steps above for re-recording if
needed.
4. RESSETING THE PROGRAM
1. Press and hold SET key for 3 seconds to activate the LCD display, then press SET and the
hour digits will flash.
2. Press and hold REC for 3 seconds until the
icon and alarm clock disappear, which
means program eliminating is finished.
3. Refer to the operating steps to reset the program.
-3-