7.Channel button:
press this button, can select to encode between transmitter and one
of receiver collar, or between transmitter and 2nd of receiver collar.
8.Launch button:
after you finish mode selecting, press this button for confirmation.
9.
Mode button:
include 4 modes as Static Mode, Vibration Mode, Beep Mode and Led
light Mode.
10. Charging hole:
charge for Remote Collar.
11.Lithium battery:
3.7V 240 mAh LiP.
A
When charging the battery, the red LED light shows
up and changes to green LED after fully charged
B
In LED Light mode, press the launch button, the green
LED in the Receiver Collar will flash every one second
C When Standby, the Receiver Collar will flash green
LED light every four seconds
D
After turn on the Receiver Collar, press and hold the On/Off/Encode button for 5
seconds to enter encoding period The green LED light will keep flashing for 10 seconds
to indicate the encoding time.
Features
1.Chargeable Remote Transmitter and Receiver collar
2.Waterproof Receiver Collar your pet can swim in the water
3.100 levels of vibration
4.100 levels of static shock (optional)
5.The levels can be altered by pressing Up & down button.
6.In beep mode, it activates a tone on the receiver..
7.In LED light mode, it activates a flashing green LED light every one second
8.Power save:
The receiver collar will go into deeply sleep if no operation for 5 minutes. And any
movement will activate the receiver.
The transmitter will go into STANDBY MODE if there is no operation after 2 mintues
and go into deeply sleep after 5 minute, press any button except LED light button can
activate the transmitter from Standby mode and press Mode button for 5 seconds to
activate the transmitter from deep sleep mode.
6
9.The system can be used for 1 or 2 Receiver Collars.
10.Two pairs of metal prong (short/long) to suit dogs with varied fur thickness.
How the Petrainer Rechargeable and
Waterproof Training Collar Works
Petrainer Rechargeable and Waterproof Training Collar has been proven safe,
comfortable, and effective for all pets over 8 pounds. This system assists you
in controlling your pet without a leash in a range up to 300m. At the push of a
button, the Remote Transmitter sends a signal, activating the Receiver Collar.
Using the Remote Trainer consistently and correctly, much misbehavior that
you pet exhibits can be corrected or any basic obedience commands can be taught.
Important:
The Remote Trainer has a range up to 300m. Depending on the
way you hold the Remote Transmitter, the range may vary. Hold the Remote
Transmitter in a horizontal position away from your body to achieve optimum
range. Terrain, weather, vegetation, transmission from other radio devices,
and other factors will affect the range of your Remote Trainer.
Operating Guide
Prepare the Remote Transmitter:
Charge the Remote Transmitter
1.Connect the charger connector to the charging hole.
2.Plug the charger into a standard outlet
3.The red light on the Transmitter will be on
4.Charge the Transmitter at least 6 hours for the first charging
5.After fully charged, the red led will be turned off automatically.
Low battery indicator: the symbol will show up on the right down
side of LCD screen when it need to recharge
How to use the Remote Transmitter
1.To turn on/off the Transmitter, hold the Mode Button for 5 seconds.
2.Set to the different modes by pressing the Mode Button-The LCD
images will change from
