From the Systems page, enter the desired network communication parameters in the
cells as shown here.
Click
Save
to apply the new network parameter settings.
C22 will restart with new settings.
6
Step
M
ODIFY
C22 N
ETWORK
C
OMMUNICATION
P
ARAMETERS
(C
ONT
.)
7
Step
I
NTRODUCTION TO
C22 W
EBCENTER
C
ONTROL
A
PPLICATION
Configuration and operational commands for C22 are entered through the webcenter
control application.
Webcenter is resident in the C22 processing engine and may be accessed through a
web browser such as Google Chrome or Mozilla Firefox.
Enter a username and password on the login page to open webcenter.
Login credentials for the default administrator account are:
Username –
admin
Password –
a
Following login, the control application always opens to the Webcenter page for
processing channel 1, as shown here.
7
Step
I
NTRODUCTION TO
C22 W
EBCENTER
C
ONTROL
A
PPLICATION
(C
ONT
.)
A brief description of control and configuration functions available from the webcenter
page is provided here. Detailed configuration and operation procedures are available
in the C22 User Guide.
- Channel 1
– Opens Webcenter set-up page for processing channel 1.
- Channel 2
– Opens Webcenter set-up page for processing channel 2.
- HDMI
– Selects signal source for local HDMI output.
- Auxiliary Audio
– Contains controls to configure analog audio inputs and software
faders to set level of auxiliary audio source. Also contains controls to select source
for local analog audio output as the audio signals from any of the encoder mixers
or local video output channels, and software faders to set level of local analog
audio outputs.
- System
– Available only to administrative level users; opens control page for C22
system set-up parameters.
Part No. 81-9059-0732-0 Rev. A
Quick-Start Guide
C22
For further information, refer to PESA Xstream C22 User Guide
Step
S
YSTEM
S
ET
-U
P AND
C
ONFIGURATION
C
ONTINUED
F
ROM
P
REVIOUS
P
AGE
7
Step
I
NTRODUCTION TO
C22 W
EBCENTER
C
ONTROL
A
PPLICATION
(C
ONT
.)
Set-up and configuration commands and settings for each processing channel are
entered through its webcenter page. An example page is shown below.
- Network IP (Input)
– Displays IP address and status of the H.264 source connected
to the decoder, when IP streaming decoder is active.
- Local Input
– Radio buttons allow selection of input port for local video source of
selected processing channel.
- Decoder Setup
– Opens Decoder control page.
- Encoder Setup
– Opens control pages for selecting output stream parameters and
streaming encoder configuration.
- IP Audio Setup
– Opens control page for a two channel audio mixer. Use “faders”
and channel panning options to create a custom stereo audio track for AAC encoder
output.
- Frame Sync Setup
– Allows selection of signal source and frame sync parameters
for local video output for selected processing channel.
- Local Audio Setup
- Opens control page for a two channel audio mixer. Use
“faders” and channel panning options to create a custom stereo audio track for
embedding into local SDI video output.
- Network IP (Output)
– Displays protocol of the output signal when the streaming
encoder is active. RTSP Player String displays a character string that contains
connection parameters for RTSP channel. Entering displayed connection
parameters to an RTSP client will initiate a connection with C22 server and establish
a streaming transport.
- Local Output
– Displays output ports that are currently available as local signal
outputs, and the video format of output signal. A radio button allows you to select
whether rear panel BNC connector for processing channel is configured as an input
port or an output port.
P
AGE
H
EADER
C
ONTROLS
& D
ISPLAYS
- Users
– Allows an administrative level user to add users to the C22 system and
grant or revoke administrative access privileges.
- Logout
– Logs user out of a C22 webcenter session.
- About
– Provides system software/firmware revision data and other C22
information.
- Web server communication activity indicators
– Provide visual display of
web server activity.
- User Guide
– Opens a copy of the C22 User Guide.
M
ENU
S
ELECT
T
ABS
W
EBCENTER
P
AGE
C
ONTROLS
& D
ISPLAYS
W
EBCENTER
P
AGE
C
ONTROLS
& D
ISPLAYS
(C
ONT
.)
*If any components are missing or damaged, contact PESA Customer Service by phone
or e-mail.
Customer Service:
(256) 726-9222
Toll Free:
(800) 323-7372
Fax:
(256) 726-9268
Email:
