Part No. 81-9059-0732-0 Rev. A
Quick-Start Guide
C22
For further information, refer to PESA Xstream C22 User Guide
Carefully unpack C22 module from shipping container and verify
package contents against contents shown below
Visually inspect for any signs of damage in shipment or transit
If any components are missing or damaged, contact PESA
Customer Service
1
2
P
ACKAGE
C
ONTENTS
:
V
ERIFY
I
TEMS
S
HOWN
A
BOVE
A
RE
I
NCLUDED
W
ITH
M
ODULE
*
U
NPACK
S
HIPPING
C
ONTAINER
1
Step
U
NPACK
X
STREAM
C22
M
ODULE
2
Step
G
ET
A
CQUAINTED
2
Step
G
ET
A
CQUAINTED
(C
ONT
.)
Quick
Start
Guide
AC POWER ADAPTER –
IF PURCHASED AS
STAND-ALONE
MODULE
PESA’s X
STREAM
C22 is a dual channel encoder/decoder
device for high definition video processing, audio processing
and IP streaming.
Each processing channel supports an IP streaming decoder
that functions as a remote client for decoding an IP stream for
video streams up to 720p/60, and an IP streaming encoder to
broadcast an IP output stream from a variety of input signal
sources.
Each processing channel offers video and audio input and
output interface through a variety of rear panel connection
options and signal formats at resolutions up to 1080p/60.
BNC ports and SFP connector ports are bi-directional.
Input for an external analog sync reference source allows local
output video to be frame synced for use in broadcast and other
high-end video environments.
An independent audio mixer function is provided for each
encoder and local output allowing audio associated with each
input or output video source to be blended or replaced with
local auxiliary audio.
All audio processing is dual channel for full L/R stereo or other
applications.
C22 is housed in a small footprint, modular chassis.
Front panel display device and channel status LEDs provide
real-time status monitoring.
Optional rack mount kit allows up to two C22 modules to be
installed in a single 1 RU frame with a built-in power
distribution module that provides power for both modules.
Integrated web server supports a browser-based graphical
user interface (GUI) control application for password-protected
access to all operating controls and functions of the device.
F
RONT AND
R
EAR
P
ANEL
L
AYOUT
The following support equipment is recommended for best performance of a C22 installation:
- Gig-E Ethernet Recommended, 100 Mbps Minimum
- Recommended Web Browsers:
Google Chrome, Ver. 36.0 or later
Mozilla Firefox, Ver. 24.0 or later
Apple Safari, Ver. 6.2 or later
Internet Explorer, Ver. 10.0 or later
PESA’s Xstream C22 ships from the factory with the following factory defaults:
IP Address
: 192.168.1.100
Gateway:
192.168.1.1
Subnet Mask
: 255.255.255.0
Bi-directional rear panel BNC connectors by default are selected as input ports.
S
YSTEM
R
EQUIREMENTS
F
ACTORY
D
EFAULTS
Locate each C22 module or extender frame for convenient access to I/O signals and Ethernet
network connection.
Ensure primary power is available and that each module or extender frame has clearance for
cooling air.
If mounting modules in extender frame, slide module into position from rear, as shown below,
and secure by tightening thumb screw on front of rack panel.
When modules are mounted in extender frame, power is derived from external power supply(s)
and connected to individual modules using connector cables from power distribution module as
shown.
For further information, refer to PESA Xstream C22 User Guide
4
Step
C
ONNECT
V
IDEO
& A
UDIO
I/O
AND
N
ETWORK
C
ABLES TO
C22
Using illustrations below and in Step 2 for reference, complete I/O connections to module prior
to applying power.
Power (PWR) -
Operating power (12 VDC) is attached to this connector. When module is used
standalone, power is derived from a furnished external power supply “brick.” If module is
mounted in rack frame, power is derived from frame power distribution module.
Ethernet Ports 1 and 2 –
PESA XStream C22 has a 2 port Ethernet switch built-in. You may
use either RJ-45 port to connect the C22 to the Ethernet, and use the open connector as a
connection point for another device. Often, this feature is used to daisy-chain C22 modules. Be
aware, however, that if the directly connected module is removed or loses power, the
downstream device will also lose connection to the Ethernet.
Audio In 1 & 2 (3.5mm TRS Connectors) –
Dual inputs for stereo analog audio signals. See
example hook-up illustrations and pinout table on next page.
Audio Out 1/2 (3.5mm TRS Connector) –
Dual line level, stereo, analog output audio signals
for program or monitoring applications. See pinout table on next page.
PWR
ETHERNET AUDIO
OUT 1/2
IN 1/2*
IN 2*
USB
+12VDC
HDMI IN
HDMI OUT
*See User Guide
REFERENCE
I/O 1
I/O 2
SFP
1 2
SFP
I/O
Module
+12 VDC Primary Power
From External Power
Module or Rack Mount
Chassis Power Supply
Ethernet
Network
Port 2
Ethernet
Network
Port 1
Analog
Audio Input*
Channel 1 & 2
(L & R) with
Unbalanced
Inputs
Channel 1 (L)
with Balanced
Input
Analog
Audio Input*
Channel 2 (R)
with Balanced
Inputs
Not Used with
Unbalanced
Inputs
*See Table in Next Column
Channel 1 &
2 (L & R)
Unbalanced
Outputs
Analog Audio
Output*
Native HDMI Input
Selectable as
Source Signal for
Either Processing
Channel 1 or 2
May attach a DVI
Input with Adapter
Cable
HDMI Input
HDMI Output
Local HDMI
Output
May attach a
DVI Adapter
Cable
Analog
SYNC
Reference
Input
Processing
Channel 1
Bi-Directional
BNC I/O
Connector for
SDI Video
Select Port Signal
Direction through
Webcenter
Control Page
Processing
Channel 2
Bi-Directional
BNC I/O
Connector for
SDI Video
Select Port
Signal Direction
through
Webcenter
Control Page
Chnl 1
I/O
Chnl 2
I/O
Bi-Directional SFP
Module Cage
Supports SFP I/O
Module for Specific
Application
(See User Guide)
3
Step
L
OCATE
C22 M
ODULE IN
O
PERATING
P
OSITION
OR
I
NSTALL IN
O
PTIONAL
R
ACK
F
RAME
Power Distribution / Fan Module
External Power
Supply Module A
External Power
Supply Module B
(Redundant Power)
