PESA PRO-HDMI-CAT-PLG User Manual Download Page 3

 

~ 1 ~

 

 
The 

PRO-HDMI-CAT-PLG HDMI 1.3 over Single CAT5 Direct Plug-in

 

Extender 

boosts up the 

audio/video transmission distance up to 25m in HDTV 1080i format, or 15m in HDTV 1080p 
format. With only one cost effective solid category cable, users can readily extend HDTV sources 
from DVD player, Blu-ray Disc player, PS3, PC, and any other kinds of sources compliant with 
TMDS to distant display monitors including HDMI or DVI enabled TV sets or LCD PC monitors. 
With the state-of-the-art Silicon Image chipsets embedded, deep color video, 7.1ch audio, and 
HDCP supports and compatibility are all further assured. Therefore any HDMI source device can 
transmit utmost high quality video and audio over great distance at minimal cost. 

The PRO-HDMI-CAT-PLG includes two units: transmitting and receiving units. The transmitting 
unit is used to capture the input HDMI or DVI signals and carry the signals through one RJ45 
connector into one cost effective Cat-5/5e/6 cable. The transmission distance between the sending 
and receiving units can be up to 25m at HD (720p/1080i) or 15m at Full HD (1080p). With the 
receiver can be directly plugged into the HDMI display, users do no need to find a power outlet for 
traditional HDMI receiver and also save a HDMI cable with ease of use. 

 

 
 

Features 

z

 

HDMI founder Silicon Image chipsets embedded for superior compatibility and reliability 

z

 

HDMI 1.3c compliant 

z

 

HDCP compliant 

z

 

Extends HDMI signals to 15m over CAT5e at 1080p and likely longer with better HDMI 
source device, better grade HDMI display, and better quality solid CAT6/7 cable 

z

 

Extends HDMI signals to 25m over CAT5e at 1080i or 720p and likely longer with better 
HDMI source device, better grade HDMI display, and better quality solid CAT6/7 cable 

z

 

Purely unaltered uncompressed 7.1ch digital HDMI transmission 

z

 

Easy installation with wall mounting design at transmitter and direct plug-in at receiver 

z

 

Perfectly integrated with other HDMI over CAT5 series products 

 
 

The length depends on the characteristics and quality of the cables.

 

Higher resolutions and 

longer transmission distances require low skew cables (<25ns/100m) for best performance. 
Unshielded CAT6 with metal RJ45 connectors is recommended

 

INTRODUCTION

Summary of Contents for PRO-HDMI-CAT-PLG













Reviews: