~ 5 ~
EDID LEARNING
For learning EDID from the DVI display, please follow the instructions below:
Step 1 – Finish the installation.
Step 2 – Dial “
SIGNAL LEVEL
” on the receiving unit PRO-DVI-CAT-RX counterclockwise
( ) to
7.
The LED of the RJ45 connector on PRO-DVI-CAT-RX will dim and light
again in a few seconds, which indicates the EDID profile of the DVI display is
recorded to PRO-DVI-CAT-RX.
Step 3 – Turn off PRO-DVI-CAT-RX. Plug the DVI connector on PRO-DVI-CAT-TX to the
DVI port of PRO-DVI-CAT-RX. Turn on PRO-DVI-CAT-RX and the LED of the
RJ45 connector on PRO-DVI-CAT-TX will dim and light again in a few seconds,
which indicates the EDID profile of the DVI display is successfully saved to the
transmitting unit PRO-DVI-CAT-TX.
Step 4 – Resume normal installation.
For restoring the default EDID to the extender, please follow the instructions below:
Step 1 – Turn off PRO-DVI-CAT-RX. Plug the DVI connector on PRO-DVI-CAT-TX to the
DVI port of PRO-DVI-CAT-RX. Turn on PRO-DVI-CAT-RX.
Step 2 – Dial “
SIGNAL LEVEL
” on PRO-DVI-CAT-RX clockwise (
) from anywhere to 6.
The LED of the RJ45 connector on PRO-DVI-CAT-TX will dim and light again in a
few seconds, which indicates the EDID profile is restored to default value on
PRO-DVI-CAT-TX.
Step 3 – Resume normal installation.
CAT5 / RJ45
PIN DEFINITION
