~ 3 ~
PANEL DESCRIPTION
Transmitting unit
PRO-DVI-CAT-TX
DVI
: Connect to a DVI source device with a DVI male-male cable.
RJ45
: Plug in a Cat-5/5e/6 cable and link it to the RJ45 port
DVI IN CAT 5/6
on the receiving unit
PRO-DVI-CAT-RX.
Receiving unit
PRO-HDMI-CAT-RX
Input Panel
DVI OUT
SIGNAL
LEVEL
DVI IN CAT 5/6
+5V DC
P/N PRO-DVI-CAT-RX
+5V DC
: Connect to a 5V DC latch-locking power supply unit.
DVI IN CAT 5/6:
Plug in a Cat-5/5e/6 cable and link it to the RJ45 port on the transmitting unit
PRO-DVI-CAT-TX.
Output Panel
DVI
OUT
SIGNAL
LEVEL
DVI
IN
CAT 5/6
+5V DC
P/N PRO-DVI-CAT-RX
SIGNAL LEVEL
: Adjust the 8-level signal equalization control to the received DVI signals. The
DVI signal level varies from 0 (strongest) to 7 (weakest) for respective transmission length
from longest possible range to short distance. Adjust the signal level may cause overpowering
issue that would shorten the product life significantly!
DVI OUT
: Connect to a DVI display or projector with a DVI male-male cable.
