Perun V2 Hybrid User And Installation Manual Download Page 1

 

Perun V2 Hybrid 

User and installation manual 

 

Perun V2 Hybrid replaces mechanical contacts in your airsoft replica or gel blaster and provides lots of 
useful features. Optical and magnetic sensors allow to eliminate many moving parts that are prone to 
damage, thus increasing the reliability. The elasticity of this unit gives you certainty, that replica made 
from  parts  from  different  manufacturers  will  not  have  any  incompatibility  issues.  Adaptive  trigger 
control allows switching from a very short trigger travel to a long one even in the field, with almost any 
trigger, including stock ones. 

Reading this manual will help you fully exploit this unit’

s potential and in case of encountering any 

problems, you can look for solutions to them here. 

 

Manufacturer: 
Perun 
Barwicka 8 St. 
60-

192 Poznań

, Poland 

e-mail: 

[email protected]

 

 

Table of contents 

1. 

Technical data.................................................................................................................................. 2 

2. 

Installation ....................................................................................................................................... 3 

3. 

During the start-up .......................................................................................................................... 5 

4. 

Adaptive trigger control .................................................................................................................. 5 

5. 

Features and programming ............................................................................................................. 6 

6. 

Factory settings ............................................................................................................................... 8 

7. 

Diagnostic system ............................................................................................................................ 9 

8. 

Sensor check .................................................................................................................................. 12 

9. 

Modifications needed in Krytac and other gearboxes .................................................................. 13 

 

Summary of Contents for V2 Hybrid














Reviews: