Ordering Information & Notes
Product Code
Description
PSBAS2220
Sounder Base (B501) with evacuation tone. Configurable to AS2220-AT
with alert tone
Notes
1. When switch S1 is UP, this product is designated PSBAS2220-AT. The PSBAS2220-AT generates the NZS 4512:2010 alert signal when the
detector is in alarm. (PSB units manufactured before mid-2020 were configured with a link, MJ1. To configure the product to generate the alert
signal when the detector is in alarm, link MJ1 should be fitted.)
2. The NZS 4512:2010 Appendix F evacuation signal is the same as the evacuation signal specified in Australian Standard AS 2220.
The information in this document must not be treated as partial or complete instructions for the design, construction, installation, commissioning, or
maintenance of fire detection, fire alarm, or building evacuation systems. Fire and evacuation systems must be designed and installed by properly
qualified persons, in accordance with all regulatory requirements.
Unless explicitly stated otherwise, this document provides typical specifications and nominal dimensions. Actual product performance and dimen-
sions may vary.
All information in this document is subject to change. Please consult Pertronic Industries or visit our web site for up to date information.
PERTRONIC® is a registered trademark of Pertronic Industries Limited.
Pertronic Industries Ltd
www.pertronic.net
0302 AS2220 Sounder Base Issue 4.1 20201201
F220
Sound Pressure Distribution
General Connection Diagram
