background image

Before use

Intellectual Property Rights

08

Before use

Intellectual Property Rights

07

2. Antenna mounting

Insert antenna in magnet base
and screw it tight.

4. Speed detector connection

Speed detector is a mandatory device to secure drivers’ safety while driving. Speed
detector detects vehicle speed and automatically shut off display screen when vehicle
is moving (audio remains alive). Connection may vary depending on vehicle type, so
please consult with mechanic for speed detector connection.

3. Power connection

PUSH

1

2

3

4

5

6

D D

FF

RPT

Plug in power cable to the DC IN port, and plug in cigar lighter charger to the socket.

For best reception, place antenna on the loop using magnet base.
For best performance, fasten antenna connector tight.
It is recommended to wrap cables with waterproof tapes.
Organize excessive cables with cable holders.

Plug in one end of speed detector cable to SPEED DET port. And, connect another end of speed
detector cable to vehicle’s speed pulse signal line. Display screen will be shut off when vehicle is
moving.
Please consult with local mechanic since vehicles’ pulse signal position varies by vehicle type.
In case speed detector is not properly connected as stated, display screen remains active while
driving, and it may cause serious incidents. 
Any incident caused by absence of speed detector will be responsibility of users or drivers.
Manufacturer will not be responsible for the consequences at any degree.

Please consult with mechanic when connecting power directly from vehicle.
Please be sure to clean dusty from cigar lighter charger socket.

Screw in antenna cable with
antenna connector.

Summary of Contents for DMR132vlm


















Reviews: