6
CAUTION: Always set direction first by pressing both handles in the same direction
(away for down, to the rear for up)
before
pressing the throttle trigger. Changing
direction with the throttle engaged can cause erratic operation and relay damage.
4.
To Lower the Chair
– 1) first, press both control handles forward, away from
you, until they stop, then, 2) Slowly pull the throttle trigger (right side handle
standard) until the chair begins to move. The speed of the chair is controlled by
how far the trigger is pulled – pulling the trigger as far as it will go will move the
chair at maximum speed. Releasing the trigger (or either handle) will cause the
chair to stop.
5.
Release the trigger when you’ve reached your desired height position. If you’re
working under a vehicle or machine, it is recommended that you lower the chair
to the desired working height before getting beneath the work. If you need to
raise the chair, move out from under the work before raising the chair, then roll
back under the work. Never raise the chair beneath the work.
WARNING: Never raise the chair beneath the work.
6.
Once you’ve completed your task, lower the chair to its lowest position and move
out from under the work. Roll out to a safe position, ensuring adequate clearance
for the chair and the headrest.
1
1
2
Summary of Contents for Human Hoist Power Shop Chair
Page 1: ...Operation Manual...