EN
44
7.4 -
OFF (disabling the thermostat)
This setting has the purpose of locking thermostat functions
when heating or cooling must remain off.
2-
The display shows
, to indicate that the thermostat is disabled and all functions are inactive; the
OFF
display only shows room temperature reading, the descaling function, if enabled and (in WINTER
mode) the temperature Set plus the antifreeze protection symbol
.
t
1- In «CLEANING» mode
, press the button
(par. 7.3)
briefly to set the thermostat to
and consequently
OFF
«Switch off the system»
.
8 - STRUCTURE OF THE MAIN MENUS (use and configuration)
The Menus are arranged in sequential order
-
LANGUAGE
(selection of the desired language)
-
RULE
(selection of temperature control mode)
-
UNIT
(selection of temperature unit of measure °C/°F)
-
OFFSET
(correction of detected room temperature)
-
BLOCKS
(it lets you limit the value of set temperature points)
-
PROBE
(setting a remote temperature probe
)
-
INPUT
(setting an external contact for remotely enabling /
disabling
the programmable thermostat)
-
PUMP ON
(disabling / enabling the descaling function)
-
CONTRAST
(to change display contrast)
-
BACKLIGHT
(to enable/disable display backlighting)
-
PASSWORD
(to restrict the use of user and/or installer
functions of the thermostat)
-
RESTORE
(
RESET operation)
4 CONFIGUR
-
INFO SW
(information about the firmware version installed)
1 SEASON
(Winter or Summer mode)
2 SET TEMP
(modification or disabling of Set antifreeze temperature)
3 USER PASSWORD
(set user password)
Installer or skilled user menu:
User Menu:
T
7 - USE OF THE THERMOSTAT
in WINTER mode with antifreeze temperature disabled or in Summer mode, the
symbol will not
t
be visible.
in the event of low batteries, the symbol will flash on the display.
3-
to reactivate the thermostat
Press key
.
Set
OK
18
20
22
back
SetT
Set
