EN
5 - INSTALLATION
After having made the electrical connections:
!
Apply the terminal cover to the base, securing it to
hook .
E
!
To remove the cover, use a small screwdriver on
hook for leverage.
E
1°
3°
2°
5.5 - PROCEDURE TO FASTEN OR REMOVE THE THERMOSTAT TO/FROM THE WALL-MOUNTED BASE
E
C
D
C
Hook the thermostat to the wall base in teeth .
C
Then press the thermostat at the bottom to complete fastening in slot .
D
D
Unhook the thermostat from the
wall base, using a screwdriver in
the specific slot ( ) in the lower
D
part of the device for leverage,
then turn to remove it.
Removing the
thermostat
from the wall base
40
Convenient programming
All setting operations may be performed before
fastening the device to the wall base; this means
setting may be carried out while comfortably
seated.
The flashing
indication with fixed winter or
ON
summer symbol and the item
indicates
NO RELAY
that the thermostat is detached from the wall base.
Should thermostat setting take place before fastening to wall base, upon
completing installation the
indication (off or flashing) on the display
ON
might not correspond to the actual relay status.
Within
after fastening the thermostat to the wall base,
1 minute at the most
the relay activates with the indication
(off or flashing) displayed.
ON