1 - TECHNICAL SPECIFICATIONS
1.1 - F
(based on the model)
unctional characteristics
Power supply voltage
230 V c.a. +/- 10%
Frequency
50-60 Hz
Degree of protection
IP20
Type of output
n° 1 relay with changeover,
single-pole, voltage free contact:
NO/COM/NC 16 (2)A 250V~
Operating temperature
from 0 °C to +50 °C
Storage temperature
from -10 °C to +65 °C
Absorption/Internal consumption
5.7 VA
Cross-section of wires to terminals
1...6mm
²
Dimensions (LxDxH)
35 x 60 x 90 (2 DIN modules)
Charging reserve during power
Failure
max 15 days
with NiMH rechargeable battery
Rated impulse voltage
4kV
Time allowance
2300W
700W
290W
(total capacity 35 µF)
105W
Installation
DIN bar - back panel (with optional KIT)
Software
ClassA
Insulation
Class II
Pollution rating
Normal
Controllable maximum power
+/
0.5 sec/day at 25 °C
Type of action, disconnection
and device
1 B U S / electronic
3500 VA
per single
contact
Max
switchable
power
Display LCD 1" 1/3 constantly backlit.
Number of programs: 20 (20 on and 20 off) assignable to channel (C1)
Minimum ON/OFF programming 1 second.
Programming Time:
from 1 sec to 99 sec
from 1 min to 59 min
from 1h to 24h
from 1 day to 7 days for days and/or block so days (weekly model only)
Programming in seconds, ideal for school bell activation or sirens
for work start and finish.
Programming for interventions straddling midnight using a single
program.
Modifiable permanent memory (EEPROM) for maintaining programs
beyond the charge reserve.
Minute by minute updating of variables and programming.
Channel activation at the end of the minute.
Possibility of temporary or permanent forcing of channel.
Possibility of deleting single programs.
Deleting all entered data.
Reset Operation.
Captive screw terminals.
Hinged and sealable glass.
Possibility of back panel installation with optional accessory kit.
(7 x 15W)
Standard for marking
LVD/EMC EN60730-2-7
Minimum charging time
72h
16
EN
Summary of Contents for 1IO 6081
Page 68: ......
