Perreaux eloquence CDt, Owner'S Manual

Page: 9 / 22

6
Sleeve Tip
Sleeve Ring Tip
Sleeve Ring Tip
Sleeve Tip
Sleeve: GND
Tip: Signal
5 IR Input
The IR (infrared) input allows your éloquence transport to receive com-
mands from home automation systems or other components.
The IR input uses a stereo 3.5mm (
8
”) plug, and accepts voltages up to
12V DC. The plug must meet the specifications shown below:
Sleeve: GND
Ring: No connection
Tip: Signal
Using an external IR receiver allows the transport to be placed inside a
cabinet or outside the normal line-of-sight of the remote control. The plug
must meet the specifications shown below:
Sleeve: GND
Ring: 5V+DC
Tip: Signal
NOTE: Do not use a mono 3.5mm (
8
”) plug, this may cause damage to the IR input.
6 IR Output
The IR (infrared) output allows your éloquence transport to relay un-modu-
lated commands received via the IR sensor on the front panel, or to pass on
commands from home automation systems or other components received
via the IR input.
The IR output uses a mono 3.5mm ( 8 ”) plug, and transmits voltages from
0V DC up to 5V DC. The plug must meet the specifications shown below:
Sleeve: GND
Tip: Signal
7 RS-232 Port
The RS-232 (RJ45) port is used both for downloading new operating soft-
ware into your éloquence CD Transport (for example, should new features
ever be added), and also for external control of the transport by systems
such as Control4™, AMX™ and Crestron™. For more information, please
contact your dealer and ask about home automation systems.
8 AC Mains Input
The IEC standard AC mains input is used with the removable power cord to
supply your éloquence CD Transport with power.
Prior to connection to the AC mains, please check the voltage label on
the rear panel to ensure that your transport conforms to the power supply
in your area. Never attempt to connect the unit to an incorrect voltage –
severe damage may result.
9 AC Mains Fuse
The AC mains fuse is user serviceable, and should always be replaced with
the same type and rating, refer to the ‘Technical Specifications’ section for
more information.
NOTES: Fuses do not usually blow without a reason. Any doubts about
fuse failure should be conveyed directly to your Perreaux dealer. Ensure
your éloquence transport is disconnected from the mains power before
attempting to change the fuse.