7
2
2
2
2
Instant Install
If you are like us, the first thing you will want to do is to play your favourite
piece of music through your new ECD2. The following instructions are written
to enable you to achieve this as quickly as possible. These are not
comprehensive instructions, but are designed to enable you to play music now!
Note: Please take the time to read the ECD2 manual thoroughly as it
incorporates many features, which will enhance its operation.
Placement
Best results will be achieved when placed on a solid surface. DO NOT place on
a carpeted floor or cover the player!
Turn off associated components
This minimises the potential to damage any other components when connecting
your ECD2 into the system.
Connect ECD2 to amplifier
Connect the output of the ECD2 to the un-balanced (
RCA
) inputs at the rear of
your amplifier.
Note: Try to keep all interconnect cables as far from loudspeaker cables as
possible and well away from all AC mains leads.
Switch on ECD2
After checking the supply voltage compatibility with the voltage rating on the
ECD2 rear panel, insert the power cord-set supplied into the rear of the unit and
into the wall. Switch on the socket at the wall and power up the ECD2 by
depressing the switch on the front panel.
Switch on your amplifier
Make sure your amplifier is connected to the mains and switch it on.
Insert your favourite CD
Open the disc drawer by pressing the ‘O/C’ button and insert your favourite CD.
Press ‘PLAY’ on the ECD2
Increase the volume
Slowly increase the volume control of your amplifier to achieve a comfortable
listening level.
CONGRATULATIONS!
Now that you have achieved your first objective, sit back, relax and please read
the rest of the manual at your own pace, in your favourite armchair, whilst
sipping a hot cup of coffee. You’ll find the whole experience much more
pleasurable whilst listening to music.
