6
1
1
1
1
Unpacking and Placement
The ECD2 is packaged for maximum protection. Please carefully read the
instructions below before proceeding to unpack the unit. Be extremely careful.
Unpacking
Procedure
à
Inspect both ends of the cardboard box and open at the end without the
central staple by slitting the reinforced tape at either side.
à
Fold back the flaps and tip the package on end and the inner box will
slide out.
à
Lay the inner box down flat and upright, open it conventionally by
separating the top tray from the bottom.
à
The product can now be removed from the bottom packaging. This will
be easier if you have someone to help you by holding the base of the
box.
à
Alternately, the bottom tray and player could be tipped upside down
and the bottom packaging removed. If opened in this manner, please
ensure that you turn the contents over again.
Note: Be very careful to secure the unit if you are planning to flip the package
upside down.
à
Remove the two white polystyrene protectors off either side of the
player , leaving the black material covering.
à
Pull back the material and remove the protective black tissue from the
front panel.
The player is now unpacked and ready for further installation.
Note: Please retain all packaging material for future transport.
Box
Contents
1 x ECD2 Compact disc player
1 x ECD2 Product manual
1 x Perreaux remote control
2 x AAA batteries
1 x Detachable AC power cord
Placing
Your ECD2
The ECD2 should generally be placed close to your amplifier, keeping the
interconnect cabling short.
