Adjustments
24
Owner’s Manual MPS B2
Fig. 15. Adjustment of armrest.
Fig. 16. Locking the arm
rest angle.
NB!
Locking the arm rest angle
Use the enclosed stop screw,
A,
and
lock the arm rest by screwing the stop
screw into the predrilled hole,
B
(Figure 16).
2
1
A
B
1
Arm rest
Height adjustment
Turn the knob (15:2) clockwise or
counter-clockwise for the required height.
The arm rest can also be fitted the
other way round, i.e. with the right arm
rest joint on the left and the joint plate
the other way round to increase the
height.
Arm rest angle
1.
Loosen the handle (15:1).
2.
Adjust to the required angle.
3.
Tighten the handle.
Length adjustment
The arm rest can be fitted in two postions.
1.
Loosen the screw (16:1) and the
handle (15:1).
2.
Remove the joint plate.
3.
Fit the handle and the screw again.
