Permobil Chairman Entra, Service Manual

Page: 7 / 32

Operating the seat lift manually/Cover
Fig. 4. Using the seat crank to raise the seat.
Fig. 5. The seat tube clamp screw.
Operating the seat lift manually
Manual seat lift
1. Remove the cover and plastic plug from
the seat.
2. Loosen the seat tube clamp screw.
3. Crank up the seat using the seat lift crank
supplied, see figure 4.
4. Tighten the seat tube clamp screw.
Torque: 11 ft.Ib
Cover
Removing
1. Raise the seat to its highest position.
2. Unscrew the three plastic knobs that hold
the cover.
3. Remove the cover.
Fitting
1. Position the cover on the chassis.
2. Screw in the three plastic knobs that hold
the cover.
Fig. 6. The cover is held on by three
plastic knobs.
7
Warning! Using a drilling machine during the
manual operation of the seat lift is not allowed.
There is a risk of material damage.
Electric seat lift
If the seat lift will not move up normally, because
the battery is flat or the adjusting mechanism is
broken, you can raise the seat manually.
1. Remove the cushion from the seat.
2. Raise the seat using the seat lift crank
supplied (part number 303668-99-0).