Permobil Chairman Entra, Service Manual

Page: 17 / 32

17
Seat lift
Seat lift
Removing
1. Raise the seat lift to its highest position (for
chairs without a seat lift, use the crank
supplied), see page 7.
2. Switch off the power using the control panel.
3. Put the circuit breaker to the “OFF” position,
see page 8.
4. Remove the cover.
5. Disconnect the seat lift cable, see fig. 29.
6. Lift off the seat and lay it at the side, next to
the chassis, see fig. 30.
NB! The seat is heavy, so two people should lift it.
7. Remove the two bolts from the upper
mounting, see fig. 31:1.
8. Remove the two bolts in the lower mounting,
see fig. 31:2.
9. Lift off the seat lift.
Fig.31. Removing the drive motor.
Fig.30. Lift off the seat.
Fig.29. Seat lift cable.
1
2