Permobil Chairman 2k, Service Manual

Page: 19 / 40

Seat lift
19
Fig. 39. Seat without seat tilt, the upper part of
the seat lift is mounted with four screws.
Fig. 36. The seat plate is mounted with two screws.
The upper part of the seat lift is mounted on the
seat and can be detached as described in the
following.
12. Unscrew and remove the two screws holding
the seat plate, see fig. 36.
13. If the seat is equipped with seat tilt, unfasten
the actuator’s front bracket, see fig. 37. Draw
the seat tilt mechanism apart, see fig. 38.
NB! Check which set of holes in which the seat
frame is mounted to the seat lift platform, in order
to replace it correctly later.
14. Unscrew and remove the four screws holding
the seat lift, see fig. 38 and 39
Fitting
Fitting is performed in reverse order.
Fig. 37. Unfasten the front bracket on
the seat tilt actuator.
Fig. 38. Seat with seat tilt, the upper part of the
seat lift is mounted with four screws.