Permobil C300, Service Manual

Page: 25 / 68

25
Electric seat lift
The seat elevator is fitted with four screws.
Electric seat lift
Removing the electric seat lift
1. Raise the seat to the highest position manually.
See the previous page.
2. Switch off the main power switch on the
control panel.
3. Remove the upper chassis cover. See page 8.
4. Remove the seat and the seat angle if the
wheelchair is fitted with one. See pages 30–35.
The seat is heavy. Two people should therefore lift it when
removing or fitting it. Be careful with the cabling.
m
nB
5. Remove the seat lift by unscrewing the four
screws. See the illustration below.
6. VR2
Divide the seat lift cabling at the contact on the
cabling.
R-net
Remove the ICS general module, which is
held in place in the chassis, to the right of the
seat lift, by means of Velcro. Then disconnect
the seat lift cabling from the ICS general
module.
7. Lift the seat lift straight up out of the chassis.
assembly
Assemble in the reverse order.
ICS general module
The ICS general module is held in place
in the chassis, to the right of the seat lift, by
means of Velcro.