Page: 3/3
Technical manual, 8 Channel IR Receiver
Document Number: 205317-UK-0 Edition 1 2009-12
Configuration of the Receiver
The receiver can be configured in a way that each channel responds to a unique RF code.
At the same time each channel can be set as monostable (non-latched) or bistable
(latched) output.
How do we enter configuration mode?
•
Remove power from the module.
•
Press the S button while powering up the module.
•
The red LED will light up.
How to define a channel?
1. Press the button (I1 .. I8) of the channel that needs to be set. If you want to define
the latching mode, you also have to push S.
2. Now send the desired code with an RF transmitter. The green LED of the receiver
will light up.
3. Stop sending the RF code and release the button(s) of the receiver. The channel is
now programmed.
4. Repeat step 1 to 3 for the remaining channels.
5. Remove power from the module.
Does it work?
•
Power up the module (do not press button S!). You now entered normal operation
mode.
•
Press button I1 to I8 to close the switch of the associated channel. This is useful for
testing. The green LED will always light up when a switch is closed.
•
Send a RF code. If configured correctly, the corresponding switch will close.
Troubleshooting?
•
If the red LED flashes, the module is defective and needs to be returned for repair.