Perma STAR CONTROL, Quick Start Manual

Page: 2 / 2

LC120
MODE
cm³/Impulse
IMPULSE
/Impulse /Impulse /Impulse cm cm cm /Impulse /Impulse /Impulse
IMPULSE IMPULSE IMPULSE IMPULSE IMPULSE IMPULSE IMPULSE
MODE IMPULSE MODE IMPULSE MODE IMPULSE
IMPULSE IMPULSE
LC120
MODE
Month
TIME
Month Month Month
TIME TIME MODE MODE TIME MODE TIME TIME TIME TIME TIME
SET
MODE
◄
TIME MODE
►
IMPULSE IMPULSE IMPULSE
3
4
1
2
1 + V DC
2 OK
3 GND
4 Err
2
1
0 0
1
4
0
1
0
1
OK/
Err Err LC
2
1
0
1
4
0 0
1
OK/
Err
Err/LC
LC60
LC120
LC250
LC500
MODE
TIME
500
L L
TIME
L L
L L
L
TIME
L L
L
L L
TIME
L L
TIME
L
L L L L L
L
L L
L L
L
TIME Mode
Electrical connection Signal output Connection in parallel
IMPULSE Mode
www.perma-tec.com/star-control-parallel-wiring
HINT
Wiring diagram for 4 perma STAR CONTROL
OR
Confi guration
Electrical connection
Quick Reference
Feature
Description
Power supply Power supply is indicated by the plug symbol in the display.
Purge
Access the purge feature by holding down the SET button for 10 seconds. Release
the button when “PU” appears and the purge will start automatically and show the
“PU” LCD display. The green LED will fl ash. The purge cycle runs for 3 complete
revolutions of the drive spindle to deliver around 6 cm³ of grease. It can be stopped
at any time by pushing the SET button once.
Normal operation:
-
Green LEDs fl ash every 7 seconds
- LCD screen displays Time / Impulse setting & volume
Run cycle (lubricant being delivered):
-
Green LED’s fl ash every second
- LCD screen displays “ru”
Empty Lubricant Cartridge (LC):
- Red
LED’s double fl ash every 2 seconds
- LCD screen displays “LC”
Blockage / Back Pressure Overload (OL):
- Red
LED’s double fl ash every 7 seconds
- LCD screen displays “OL”
Purge (PU):
-
Green LED’s fl ash every second
- LCD screen displays “PU”
LC120
◄
cm³/100 h Month
TIME
LC1 LC1 LC1 L L L L L
TIME TIME
L L L L L L L
◄
TIME TIME TIME TIME
◄
LC120
◄
cm³/100 h Month
TIME
LC1 LC1 LC1 L L L L L
TIME TIME
L L L L L L L
◄
TIME TIME TIME TIME
◄
LED Light & LCD
Screen combinations
9-30 V OUTPUT
Set the LC size by
pressing the SET button
(60, 120, 250, 500 cm³)
Hold down SET button for 5 s; Select
desired mode („TIME“ & „IMPULSE“)
by pressing the SET button
Set the discharge period by
pressing the SET button
(1-12 months; 1-26 weeks → only 500 cm³)
Set the discharge volume per
impulse by pressing the SET button
(0,1 - 9,5 cm³)