INSTALLATION
NOTE:
For top of stairways, the gate should never open out over stairs.
Step 4.
Align gate with Mounting Cups and tighten the Adjuster
Screws by turning clockwise, start with the bottom Adjuster
Screws then move to the top. Tighten equally until there is
only a 1.5mm (0.5”) gap in the locking mechanism. Regularly
check tension of all Adjuster Bolts and tighten if necessary.
Step 5.
Determine which direction the gate should open. Screw in
Swing Direction Control piece opposite to the desired
opening direction. Use images below as a guide.
11
MAX
63mm
(2.4”)
EQUAL
LEFT SIDE
OPENING
BOTH SIDE
OPENING
RIGHT SIDE
OPENING
