perlick customer service (800)558-5592 | 5
PERLICK RESIDENTIAL UNDERCOUNTER USE & CARE GUIDE
NOTE: Dependent on the model and configuration, the controllers have
been programmed to only allow a lower compartment temperature
adjustment range as specified within the chart below. The upper
compartment range is not limited, but should always be kept within
the specified range shown in the table for the upper compartment. See
the chart below for the specified range allowed for your unit.
Temperature Scale
To change F to C, press and hold the down arrow for 3 seconds.
To Start A Manual Defrost (HP24Z Models Only)
Press and hold the DEFROST button (melting snowflake) for 3-5
seconds. Melting snowflake will illuminate.
15”, 24” Single Zone, 24” Shallow Depth, and ADA Controls
To Set Target Temperature
Press and release the SET button. Display will show the current
temperature setpoint.
To Change Setpoint Temperature
1. Press and hold the SET button until the display shows the
current setpoint temperature with the “F” flashing.
2. Use the UP and DOWN arrow button to scroll to the desired
temperature.
To Start A Manual Defrost (Freezer Models Only)
Press the DEFROST button (melting snowflake).
To See Maximum Stored Temperature
Press the UP arrow button to see the maximum stored tempera-
ture. To reset the maximum stored temperature, while displayed,
press and hold the SET button until ‘rst’ flashes in the display.
To See Minimum Stored Temperature
Press the DOWN arrow button to see the minimum stored tem-
perature. To reset the minimum stored temperature, while dis-
played, press and hold the SET button until ‘rst’ flashes in the
display.
On/Off
Press the ON/OFF button to turn the unit on or off.
NOTE: Dependent on the model and configuration, the controllers
have been programmed to only allow a temperature adjustment
within a specified range. See the chart to right for the specified range
allowed for your unit.
Signature Series – HP15 Models
Model
Min Temp Set
Max Temp Set
HP15R
33° F
42° F
HP15B
33° F
48° F
HP15W
45° F
65° F
HP15T
33° F
42° F
Signature Series – HP24 Models
Model
Min Temp Set
Max Temp Set
HP24R
33° F
42° F
HP24F
-10° F
10° F
HP24B
33° F
48° F
HP24W
45° F
65° F
HP24T
33° F
42° F
Signature Series Shallow Depth
Model
Min Temp Set
Max Temp Set
HH24RS
33°
42°
HH24BS
33°
48°
HH24WS
45°
65°
C-Series Models
Model
Min Temp Set
Max Temp Set
HC24RB
33°
42°
HC24BB
33°
48°
HC24WB
45°
65°
ADA-Compliant Series
Model
Min Temp Set
Max Temp Set
HA24FB
-10°
10
HA24RB
33°
42°
HA24BB
33°
48°
HA24WB
45°
65°
LED
Mode
Function
ON
Compressor is on
Flashing
Anti-short cycle
delay is on
ON
Defrost is on
ON
Alarm is on
Flashing
You are in the process of
programming the unit
LED Functions
The following table describes LED functions.
Signature Series – Dual-Zone Units
Model
Range (F)
HP24Z
Upper 33° - 42°F / Lower -10° - 10°F
HP24C
Upper 45° - 65°F / Lower 33° - 42°F
HP24D
Upper 51° - 65°F / Lower 45° - 55°F
Audible alarm will sound if the door is left ajar for longer than one
minute. Fully closing the door will clear the alarm condition, pro-
longed time spent with the door open can damage the equipment.