background image

PERLICK RESIDENTIAL INSTALLATION MANUAL

perlick customer service  (800)558-5592  |  

3

This Warranty does not apply to:

•  Damage to Products occurring during transportation.
•  Products that are used in a manner that is not normal 

residential or light commercial use.

•  Products that are: improperly installed; misused or 

abused; operated with low voltage; wired in a manner 

not conforming to electrical codes; not properly 

operated in accordance with Perlick’s instructions; not 

cleaned or maintained in accordance with Perlick’s 

instructions; modified; or damaged by lightning or 

other acts of nature.

•  Consumable items such as light bulbs.
•  Cosmetic damage.
•  Adjustments to controls, door reversal, cleaning the 

condenser or other routine maintenance.

•  Products for which the original proof of purchase, 

delivery date or serial number cannot be verified.

•  Products for which the defective parts are not returned 

for inspection if requested by Perlick.

•  Damage to other property caused by the products, 

including but not limited to loss of food due to spoilage 

and damage caused by water leakage.

THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER 

WARRANTY, EXPRESSED OR IMPLIED, INCLUDING BUT NOT 

LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY 

OR FITNESS FOR A PARTICULAR PURPOSE; PROVIDED 

HOWEVER, THAT TO THE EXTENT REQUIRED BY LAW, 

IMPLIED WARRANTIES ARE INCLUDED BUT DO NOT EXTEND 

BEYOND THE DURATION OF THE EXPRESS WARRANTY FIRST 

SET ABOVE. 
PERLICK’S SOLE LIABILITY AND YOUR EXCLUSIVE REMEDY 

UNDER THIS WARRANTY ARE SET FORTH IN THE PARAGRAPH 

ENTITLED “REMEDY” SET FORTH ABOVE. 
PERLICK  SHALL HAVE NO LIABILITY WHATSOEVER FOR 

ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES 

ARISING FROM THE SALE, USE OR INSTALLATION OF THE 

PRODUCT OR FROM ANY OTHER CAUSES WHATSOEVER, 

WHETHER BASED ON WARRANTY (EXPRESS OR IMPLIED) OR 

OTHERWISE BASED ON CONTRACT, TORT OR ANY OTHER 

THEORY OF LIABILITY.  IN NO EVENT SHALL PERLICK’S 

LIABILITY WITH RESPECT TO A PRODUCT EXCEED THE 

PURCHASE PRICE OF THE PRODUCT.
Some states do not allow limitations on how long an implied 

warranty lasts, or the exclusion or limitation of incidental 

or consequential damages, so the above limitations and 

exclusions may not apply to you. This Warranty gives you 

specific legal rights, and you may also have other rights, 

which vary from state to state.

REMEDY:

Perlick will provide the parts and labor necessary to repair 

or replace (at Perlick’s option) any parts proven to be 

defective in material or workmanship during the Basic 

Warranty Period. Perlick will provide the replacement parts, 

but not the labor, for any parts of the hermetically sealed 

refrigeration system proven to be defective in materials 

or workmanship during the Extended Warranty Period.  

The cost of freight to ship the replacement parts will be 

paid by Perlick.  Replacement parts are warranted for the 

remainder of the original warranty period, or ninety (90) 

days, whichever is longer.

REGISTRATION:

Your Perlick product can be registered via the online 

Warranty Registration form at http://www.perlick.

com/residential-products/service-support/warranty-

registration/.

OTHER TERMS AND CONDITIONS:

This Warranty applies only to products installed in the fifty 

states of the United States, the District of Columbia and the 

ten provinces of Canada.  
To obtain the warranty coverage described in this Warranty, 

Perlick or its authorized distributor or dealer must receive 

written notice of the warranty claim within the applicable 

warranty period.  To receive parts and/or service and 

the name and telephone number of the nearest Perlick 

authorized service representative, please contact your 

Perlick dealer or distributor, or Perlick’s Customer Service 

Department by writing to it at Perlick Corporation, Attn: 

Customer Service Department, 8300 West Good Hope 

Road, Milwaukee, Wisconsin 53223; or by calling Perlick’s 

Customer Service Department at 800-558-5592; or by 

e-mailing Perlick’s Customer Service Department at 

[email protected].  In addition, you can notify 

Perlick of a warranty claim by visiting Perlick’s website at 

http://www.perlick.com/residential-products/service-

support/ and filling out and submitting the Technical 

Service Request form that appears there.
All service provided by Perlick under this Warranty must be 

performed by Perlick’s authorized service representatives, 

unless otherwise specified by Perlick in writing.  Service will 

be provided during normal business hours.
This Warranty applies only to the original retail purchaser of 

the Perlick product, and may not be assigned or transferred.

Summary of Contents for HA24

















Reviews: