Perlick BBRN Series Installation & Operation Manual Download Page 21

 

Models BBR/BBS Installation & Operation Manual

Printed in USA 

21 0213

charge for un-assembled, freestanding underbar 

stainless steel modules is 20%. Assembled under 

bar modules are considered custom products 

and are not returnable for credit. The restocking 

charge on the item returned is either a percentage 

of the value of the item or $35.00, whichever is 

greater.

ONE YEAR PARTS WARRANTY

Perlick products are guaranteed against defects 

in both material and workmanship for a period of 

one year from date of sale. Defective parts will be 

replaced on a no-charge basis, F.O.B. our factory, 

when adjudged defective upon inspection. We are 

not responsible for parts damaged by alteration, 

unauthorized service, accident or abuse. All costs 

associated with replacement, including freight, 

labor and/or loss of sales, are the responsibility 

of the user..

ONE YEAR LABOR WARRANTY

In addition to Perlick’s one year parts warranty 

and five year compressor warranty, ALL PERLICK 

REFRIGERATION  SYSTEMS are offered with 

a  one  year  labor  warranty  at  no  extra  charge. 

Perlick’s one year labor warranty provides 

that Perlick will pay for the cost of any labor to 

replace any defective part for up to one year 

after installation, subject to the following terms 

and conditions: 
(A)  Parts returned to Perlick shall be returned 

freight  prepaid  and  shall  be  identified  with 

Perlick’s serial number and return authorization 

number.

(B)  Improper operation due to voltage variances, 

inadequate wiring and physical damage is the 

responsibility of the purchaser. They are not 

manufacturing defects. 

(C) Condenser coils shall be cleaned regularly. 

Failure to  provide an adequate flow of cooling 

air will void this warranty. 

(D) Factory-specified maintenance and installation 

will be provided by the selling dealer who shall 

also be responsible for the installation and set-

up of these products in accordance with local 

plumbing, refrigeration and  electrical codes. 

Perlick’s one year labor policy applies to the 

United States and Canada. IT DOES NOT 

APPLY TO REFRIGERATION SYSTEMS 

ADDED BY OTHERS (remote systems) or any 

part which has been subject to misuse, neglect, 

alteration, accident, or to any damage caused 

by transportation, flood, fire or other acts of God.

Summary of Contents for BBRN Series

























Reviews: