background image

200 mm ≈ 7 7/8 in.

400 mm ≈ 15 3/4 in.

300 mm ≈ 11 3/4 in.

600 mm ≈ 23 6/10 in.

800 mm ≈ 31 1/2 in.  

MAX:800mm/31 in.

MAX:

600mm/24 in.

Please carefully read all instructions before attempting installation. If you do not 

understand the instructions or have any concerns or questions, please contact 
our Technical Support line at 1-800-556-6806 or customer service at 

[email protected]

CAUTION:

 Avoid potential personal injuries and property damage! 

• 

Do not use this product for any purpose that is not explicitly specified in this 

manual. Do not exceed weight capacity. We are not liable for damage or injury 

caused by improper mounting, incorrect assembly or inappropriate use.

• 

This product is designed for use in wood stud, solid concrete, and concrete 

block walls - DO NOT install into drywall alone.

• 

The wall must be capable of supporting five times the weight of the TV and 

mount combined.

Minimum VESA pattern: 200mm/8 in.(W)x100mm/4 in.(H)

Check the VESA Pattern of Your TV before the Installation

Weight Restrictions

165 lbs.

(75 kg)

 IMPORTANT SAFETY INFORMATION

DO NOT exceed the maximum weight 

indicated. This mounting system is intended 

for use only with the maximum weights 

indicated. Use with products heavier than the 

maximum weights indicated may result in 

failure of the mount and its accessories, 

causing possible damage and or injury.

WARNING

If your TV weighs more, this 

mount is NOT compatible.

If your TV VESA is greater than 800x600 mm/31x24 in. or less than VESA 

200x100mm/8x4in., this mount is NOT compatible.

If this mount is NOT compatible, please contact customer service at 

[email protected] to find a compatible mount.

01

Summary of Contents for PSXFK2













Reviews: