background image

The TV brackets are attached 
to the arm assembly/ wall 
plate with plastic cable ties

TV Bracket

         x2

03

     Warning:This product contains small items that could be a choking hazard if 
swallowed.

Before starting assembly, verify all parts are included and undamaged. Do not use 

damaged or defective parts. lf you require replacement parts, contact our Product 

Support line at 1-800-556-6806 or customer service at 

[email protected]

• Please note: Not all hardware included in this package will be used. 

Awl

Stud Finder

Tape Measure

Pencil

Drill

7/32

 in.(5.5 mm)

Wood Drill

3/8 in.(10mm)

Concrete Drill

1/2 in.(13mm)

Socket Wrench

Screwdriver

Hammer

Tools Needed (Not lncluded)

Supplied Parts and Hardware

Supplied Parts and Hardware for Step 1

Spacers 

[if needed]

Washer

05

06

M6/M8

[B]

   x4 

Solid Concrete

or Concrete Block

CAUTION

DO NOT 

install into 

drywall alone 

Wood Studs 

(with Drywall)

Verify Your Wall Construction

If you are not sure the wall 

construction, please 

contact our product 
support line at 

1-800-556-6806 or 

customer service at 
[email protected]

L2.5mm

[C1]   

x8

L10mm

[C2]   

x4

L22mm

[C3]   

x4

02

Summary of Contents for PSXF3

















Reviews: