background image

Minimum VESA pattern: 100mm/4 in (W)x100mm/4 in (H)

200 mm ≈ 7 7/8 in

400 mm ≈ 15 3/4 in

100 mm ≈ 4 in

300 mm ≈ 11 3/4 in

MAX:400mm/16 in

MAX:400mm/16 in

Check the VESA Pattern of Your TV before the Installation

If your TV VESA is greater than 400x400 mm/16x16 in or less than VESA 

100x100mm/4x4 in, this TV cart is NOT compatible.

If this TV cart is NOT compatible, please contact customer service at 

[email protected](US)/ [email protected](CA) to find a 

compatible product.

 Important Safety Information

• Please read through these instructions completely before attempting installation.
If you do not understand the instructions or have any concerns or questions,
please contact customer service at [email protected](US)/ 
[email protected](CA)
• Check package contents against Supplied Parts and Hardware List to assure
that all components were received undamaged. Do not use damaged or defective
parts. lf you require replacement parts, contact customer service at
[email protected](US)/ [email protected](CA)
• Not all parts and hardware included will be used.
• Do not use this product for any purpose or in any configuration not explicitly
specified in this instruction. We hereby disclaim any liability for injury or damage
arising from incorrect assembly, incorrect mounting, or incorrect use of this
product.

Serious or fatal crushing injuries can occur from tip over. To help prevent tip over:

● Never allow children to climb, stand, hang, or play on any part of TV or TV cart.

● Use tip over restraint or anchor to attach the TV cart against wall.

Use of tip over restraints may only reduce, but not eliminate risk of tip over.

Tip over Warning

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

Summary of Contents for PSTVMC06





















Reviews: