2B-3
7/32 in. Ø5.5 mm
in. (70 mm)
Drill pilot holes using a 7/32 in. (5.5 mm)
diameter drill bit.
IMPORTANT
:
Pilot holes must be
in. (70 mm).
Be sure to drill into the center of the stud.
drilled to a depth of
2B-4
A
2
01
A
B
01
Install wall plate using lag bolts
and washer . Tighten the lag bolts
until
until they are pulled firmly against
the wall plate
.
A
STEP 3
Install Front support [02] and extensions [03] and End cap [05] together.
Install the extensions [03] to Front support [02] withe the pre-assembled screws.
Install the extensions [03] to Front support [02] withe the pre-assembled screws.
02
03
05
P7
01
B
UP
3-1
3-2
Pre-assembled scews
Pre-assembled scews
Finished
02
03
05
