Perle SR-100 Fast Ethernet Media Converter Installation Guide 20
Connecting the SR-100 to a DIN Rail
The DIN Rail clip will be attached to the SR-100.
Mounting the SR-100 on a DIN Rail
1. Position the SR-100 so that the top hooks of the DIN Rail clip
attach onto the top of the DIN rail.
2. Rotate the bottom of the SR-100 towards the rail. This will
snap the bottom hooks of the DIN Rail clip onto the bottom of
the DIN rail.
Removing the SR-100 from the DIN Rail
The DIN Rail attachment clip has a slot at the bottom of the latch
that is visible beneath the SR-100 when it is mounted.
1. Insert a flat blade screwdriver into the slot and twist the base
to release the clip. Alternatively, a downward force on the clip
will release the clip.
2. When the clip is released, pull the bottom of the SR-100 out
slightly and remove the SR-100 from the DIN rail.
