SPEED Serial adaptors User guide
Installing under SCO UnixWare
Page 41
Chapter 2 Installing drivers and host cards
8. Filesystem Manager menu, click on
Host > Exit
to close the window.
9. At the command prompt, type:
pkgadd -d /cdrom/drivers/speed/unixware/spd.pkg spd
10.Press the
Enter
key.
The system now installs the driver and displays a series of messages ending with a
successful installation message.
Upon installation of the drivers, your SPEED cards are ready to use.
Note
A re-boot of your system is not necessary as the drivers for your SPEED card are
dynamically loadable and will be loaded as soon as any software attempts to access the
associated devices.
