Perle S-10GT Media Converter Installation Guide
8
Sequence of Events
1. Media Converter A loses fiber connection (RX).
2. Media Converter A notifies the remote Media Converter that
there is a fault on the Link.
3. Media Converter B detects loss of fiber link on receiver RX.
4. Media Converter B turns off transmitter (TX).
Port Selection (Switch 3 – Test Mode)
Switch Position
Port
Up (default)
1
Down
2
When loopback mode is selected (Switch 1 and Switch 2 down),
this switch specifies which port to enable loopback mode on.
This switch is not used for BILT test mode, since it only runs on
port 1.
Energy Efficient Ethernet (EEE) (Switch 4)
Switch Position
Mode
Up (default)
Enabled
Down
Disabled
Enabled: When enabled, the media converter will auto negotiate
this capability with the attached EEE compliant devices/servers.
Disabled: The media converter will not auto negotiate this
capability with the attached EEE compliant devices/servers.
