Perle S-10GT Media Converter Installation Guide
4
Installation
The default switch setting (all switches in the UP position) will work
for most installations. These are the steps required to configure
the Perle S-10GT standalone media converter:
•
Set the DIP switch settings. (optional)
•
Connect the grounding lug. (optional)
•
Connect the power cord strain relief clip. (optional)
•
Insert the fiber module.
•
Connect the fiber.
•
Connect the RJ-45 (copper cable).
•
Using the Perle supplied power adapter, plug the power cord
into the power cord connector at the rear of the chassis.
•
Plug the other end of the power adapter into an appropriate
power outlet.
Note: The S-10GT Chassis should always be grounded for safe
and proper operation. See Grounding the S-10-GT Chassis
S-10GT-SFP or S-10GT-XFPH
